• Tilt & Rotate; fully articulating holder.
• Fixed arm length provides maximum stability.
• Arm slides vertically on 60" chromed steel post.
• Vertical range as measured from bottom of cassette/plate: Floor level up to 54" above floor.
• 18" square steel shelf base, with protective rubber mat,
  rises 4" above the floor.
• Heavy base prevents tipping.
• E-Z-Roll swivel casters (two are locking).
• Neutral Almond baked enamel finish.
• Maximum cassette thickness 1¼".
• Ships in two cartons: 1 box @ 15lbs., 1 box @ 70lbs.
• One year warranty.

• Extends plate/cassette 11" to 23" from post.
• Fully articulating holder.
• Arm slides vertically on 60" chromed steel post.
• Vertical range as measured from bottom of cassette/plate:
  Floor level up to 54" above floor.
• 18" square steel shelf base, with protective rubber mat, rises 4" above the floor.
• Heavy base prevents tipping.
• E-Z-Roll swivel casters (two are locking).
• Neutral Almond baked enamel finish.
• One year warranty.

• Holds up to 14" X 17" DR-Plates
• Lateral position only (non-articulating)
• Arm slides vertically on 60" chromed steel post.
• Vertical range as measured from bottom of cassette/plate: Floor level up to 54" above floor.
• 18" square steel shelf base, with protective
  rubber mat, rises 4" above the floor.
• Heavy base prevents tipping.
• E-Z-Roll swivel casters (two are locking).
• Neutral Almond baked enamel finish.
• One year warranty.

• Arm slides vertically on 60" chromed steel post.
• Vertical range as measured from bottom of cassette/plate: Floor level up to 54" above floor.
• Will accommodate CR Plates up to 1¼" wide.
• 18" square steel shelf base, with protective rubber mat, rises 4" above the floor.
• Heavy base prevents tipping.
• E-Z-Roll swivel casters (two are locking).
• Neutral Almond baked enamel finish.
• One year warranty.

Great for cross-table laterals, lateral decubitus views, and any situation where you need an extra pair of hands. The holder is fabricated of welded steel tubing with a durable, easily cleaned, cream-colored, powder-coat finish. Casters (3") provide easy mobility and are lockable. Vertical height adjustment of 29"-47" (737-1194mm) from the floor to center of the cassette. The holder accommodates cassettes from 8 x 10" through 14 x 17" with or without a grid. A spring loaded clamp firmly fixes the cassette in place yet allows easy removal of the cassette/film for processing. Horizontal and vertical movement (7-15" and 29-47" respectively) is fixed via positive acting screw-type locks. The cassette may also be rotated to either side of the vertical axis by 90 degrees to provide additional positioning versatility. The unit is counterweighted to offset the weight of the cassette on the extended horizontal arm.
Weight - 53 lbs.

• Holds up to 14" x 17" (35 x 43cm) cassettes.
• Accepts Grid Cassettes.
• Maximum cassette thickness 1¼".
• Eliminates hand held cassette hazards.
• Upper & Lower Channels are lined with rubber to keep all types of cassettes in a stable position.
• Ideal for table lateral views.
• Base plate slides under patient or pad.
• Adjustable clip includes a rotating R & L Marker.
• Shipping weight: 6 lbs. (3 kg).