Radiology Workstation Accessories
Radiology Workstation, Pacs Furniture, General Information
| FUNCTION-DESIGN-STRENGTH Techno-Aide is proud to introduce a comprehensive line of medical and business furniture that gives any user the most productive, relaxed and safe work environment possible.
These benefits are blended into a clean and elegant design that will complement any workspace with the support and strength of steel and the finest quality components. |
10 TIPS FOR A RADIOLOGY WORKSTATION:
1. Place the monitor directly in front of and centered about the user.
2. Place the monitor at a distance of more than 16" from the user with the viewing angle between 0 to negative 18
degrees.
3. Keep CPU within arm's reach, but off the work surface.
4. Place work surface at a height that allows legs to fit comfortably underneath with feet flat on the floor. Use a
footrest if needed.
5. Keyboard should be located at a height that allows the worker to key with the upper arms hanging relaxed from the
shoulders.
6. Keyboard should have a light negative tilt.
7. Elbows should be roughly at right angles to allow the wrists to be fairly straight.
8. Place the pointing device (mouse) at the same height as the keyboard and as close to the keyboard as possible.
9. Always maintain contact with backrest of chair to minimize back discomfort.
10. Take 20 second to 2 minute rest breaks between regularly scheduled breaks.
PRIMARY WORK SURFACE
The primary work surface, or Desktop, can be raised or lowered to position on the desktop at the optimal level for each
unique user.
There are two types of elevating mechanisms that operate within the structural steel support posts: electric and
crank.
The electric lift allows the user to raise and lower the desktop with the simple push of a button (programmable switch
is available as an upgrade). A nearby 120VAC outlet is all that is required.
The crank lift allows the user to easily raise and lower the desktop with the EZ-Crank knob which is conveniently
located on the desktop. The two benefit with choosing the crank are that no electricity is required and the crank
desktop provides all the function of the electric model at significant cost savings. |
|
SECONDARY SURFACE LIFT (SSL)
The SSL provides an extended worksurface that can be raised or lowered from the primary desk surface, to position the
front  worksurface at the optimal level for each unique user.
Desks shown with the SSL include the desk base, specially cut desktop, the SSL worksurface and the SSL mechanism.
The SSL mechanism is easily adjusted and locked with one lever, so no electricity is needed.
For specially cut corner desks, the SSL must be part of the initial order. However, if you have a worksurface with an
undivided desktop and wish to replace that with an SSL desktop in the future, a new desktop with SSL can be ordered and
mounted onto your existing base unit.
INCREASE PRODUCTIVITY, REDUCE FATIGUE, AND ENHANCE ERGONOMIC SAFETY IN EVERY OFFICE AND RADIOLOGY WORKSTATION.
|
Ergonomic Desk Features All desks include the base as listed (electric or crank) and the work surface as diagrammed.
The standard color is black base with a matte black desktop and trim, but other choices are available as shown. Custom
designs and custom colors may also be available.
Upgrades are available for many models and may include:
- Programmable digital display switch: replacement for the standard up/down switch on the electric desks.
- Locking casters: packaged set of four to add mobility to most desks.
- Desktop grommets: set of two 2½" holes, covers, and sleeves, installed at the time of order (these are necessary for
mounting monitor supports).
In addition, many optional accessories are available, such as: articulating keyboard supports, monitor supports, CPU
holders, a complete line of seating and other useful items for today's technology driven workplace.
|
|
|
